C17510 RWMA Class 3 Beryllium Copper has high thermal conductivity combined with good hardness and high temperature strength. This alloy is being chosen with increasing frequency for applications requiring a combination of high electrical conductivity and mechanical strength, and for applications requiring wear and corrosion resistance. Alloy C17510 Class III beryllium copper is specifically recommended for projection welding dies, flash and butt welding dies, current carrying shafts and bushings. Class III alloy (having higher strength than class II), is recommended for highly stressed welder structural current carrying members and heavy-duty offset electrode holders. Class III alloy is generally recommended for spot welding and seam welding wheels having high electrical resistance, such as stainless steels. Available from inventory: Solid Diameter Sizes: 1/8" through 6-1/8" Outside Diameter. Hexagon Sizes: 1/2" through 1-1/2" Outside Diameter. Plate Sizes: 1/8" Thick through 6" Thick - Tooling Grade Plate - Tool 3 (Rockwell B 92-102) Squares: 1/8 through 2" square.   Special Sizes are available Made to Order  from 1/2" (12mm) through 16" (407mm) in diameter or cross section thickness. Standard mill lengths are 12 feet (3.65mtrs) in length. Material is available cut to any length. Rectangles are available hot rolled or as cast saw cut from plate, milled or ground to within +/-.002" (.050mm) thickness. Home | Back | Contact us