C63000 Nickel Aluminum Bronze alloy is an excellent choice for applications involving heavy loads, adhesive wear, friction, abrasive wear and corrosion. The addition of nickel increases the alloys strength without diminishing its excellent ductility, toughness and corrosion resistance. Typical applications for C63000 nickel aluminum bronze included aircraft landing gear components, strut bearings, main pistons, trunnion bearings and similar vital components. 

C63000 Nickel Aluminum Bronze Conforms to specification ASTM B150 for rod and bar and ASTM B171 for plate.

Made to Order:

Forged Discs & Ring Sizes: Up to 11-1/2 feet Outside Diameter.

Sheet & Plate Sizes: Up to 8" Thick x 118" Wide x 354" long.

 

17pic.jpg (51003 bytes)Special Sizes are available Made to Order from 1/2" (12mm) through 16" (407mm) in diameter or cross section thickness. Standard mill lengths are 12 feet (3.65mtrs) in length. Material is available cut to any length. Rectangles are available hot rolled or as cast saw cut from plate, milled or ground to within +/-.002" (.050mm) thickness.

Home | Back | Contact us